How to buy office chairs from lecong furniture city

From the perspective of material composition, it can be divided into: leather office chair, PU leather office chair, cloth office chair, mesh cloth office chair, plastic office chair and so on.
From the type of use, it can be divided into: boss chair, work chair, staff chair, chair, conference chair, reception chair, ergonomic chair and so on.

The office chair, office chair, is defined in the narrow sense of the chair in the sitting position, which is defined in a broad sense as all the chairs for the office, including the large chair, the middle chair, the guest chair, the staff chair, the meeting chair, the visitor chair, the training chair, the ergonomic chair, etc. 1, office chair: one person seat for indoor use. 2, swivel chair: the office chair with the seat surface can be turned horizontally. 3, according to the office chair adjustment method: type I: chair seat and chair back can adjust the office chair; II: only the back angle adjustable office chair; non adjustable office chair: chair back, seat surface, armrest relative position, angle can not be adjustable office chair. The figure shows the JEye high-end ergonomic computer chair model of JEye1.
What are the office chairs and what are the types? What kind of office chair is good

 


Two, basic composition
1: casters: ordinary castors, PU wheels (soft materials, suitable for wood flooring, and computer room).
2: chair foot: the thickness of the iron frame directly affects the service life of the chair. Surface treatment: polishing, painting, baking paint (surface gloss, not easy to remove paint), electroplating (wooden frame can not be electroplated), plating quality is good, it is not easy to rust.
3: air bar: also known as extension rod, used to adjust the height and rotation of the chair.
4: chassis: hold up part of chair seat, and connect it with air pole.
5: chair seat: made up of board, sponge and fabric. The quality of the board is usually not felt by the consumer. Sponges: regenerated cotton, new cotton. The 99% manufacturers are both used together, the thicker the harder, the higher the cost, the thickness is appropriate, the hardness is appropriate. Hand press chair seat: fabric: Ma Rong, mesh cloth, leather. Plastic frame press the net cloth. This kind of chair is more fit for air permeability.
6: armrest: thickness affects the quality.
7: chair back seat connection (corner code): chair seat and chair back is split, steel pipe or steel plate connection, steel plate, usually 6mm or 8mm thick. But the steel plate with a width less than 150px must be 8mm thick.
8: chair back: steel frame, plastic frame chair, made of mesh cloth, with breathability.
9: waist pillow: embody the comfort of the chair.
10: head pillow: show the comfort of the chair.


Three
Three. Classification
From the perspective of material composition, it can be divided into: leather office chair, PU leather office chair, cloth office chair, mesh cloth office chair, plastic office chair and so on.
From the type of use, it can be divided into: boss chair, work chair, staff chair, chair, conference chair, reception chair, ergonomic chair and so on.
From the use of the situation, there are offices, open staff offices, conference rooms, reading rooms, books and information rooms, training classrooms, laboratories, staff dormitories, staff canteen and so on.
Four
Four. Consumer groups
The consumption of office chairs is mainly concentrated in three groups: one is the purchase of enterprises; the other is government procurement; the three is school purchase; the four is the people’s family (study room).
But nowadays, the proportion of government procurement is not big enough, mainly concentrated in the purchase of enterprises, the main force.


Five
Five. Daily maintenance
1, light lifting should be lifted, and special attention should be paid to avoid collision.
2, after sitting for a long time, you should often slap the location and edge of the sedentary area, so that it can be restored to its original state and reduce the sag due to the concentration of sitting power.
3, when placing the dermis, keep away from the heat sink and avoid direct sunlight.
4, do not rub vigorously when cleaning regularly, so as not to damage the epidermis. For the leather sofa or office chair that is used for a long time or carelessly, the cloth can be dipped in suitably soapy water (or washing powder, water content 40%~50%). Then wipe it with water and dry it with clean cloth. Do not use strong decontamination (such as detergency powder, chemical solvent turpentine, gasoline or other improper liquid).
5, in use, we should try to make the center of gravity in the middle of the pressure bar as far as possible to ensure the lifter and flexibly and flexibly. The office chair should often check the loosening of the screw on the mechanism, if the loosening is tightened in time; if the spring and knob are loose, the spring should adjust the elastic force according to the body weight of the user and make the back seat back to the position. It is the most comfortable to get up.
6, strictly prohibit sitting or placing heavy objects on the armrest of a sofa or office chair.
The office chairs must be regularly maintained according to the instructions so as to prolong their service life.
7, do not put office chairs on the ground for too long time, this will make some plastic aging, resulting in hydrogen embrittlement phenomenon.


Six
Clean attention
First of course, it is of course to understand the material of the office chair, but the general office chair feet are mainly solid wood and iron, the bench surface is leather art or cloth, in the cleaning of different materials of the chair cleaning method is not the same.
Two: if it is a leather office chair, it is best to try it in an inconspicuous position to see if it is fading. If there is a fading condition, use water to dilute it. When it is dirty, you can use mild water to make it dry naturally.
Three: solid wood office chair feet, can be wiped directly with dry cloth, and then a number of cleaning agents, do not use too wet cloth, and then to dry, that will make the solid wood rotten faster.
Four: the general cloth art stool cleaning method is spray cleaning agent, gently wipe. Special dirty words can be cleaned with warm water combined with detergent. Don’t brush with your brush. In that case, it’s easy to look old.


Seven
Six. Existing problems
At present, there are some problems about office chairs in China: lack of scientific marketing strategy. It is embodied in marketing, marketing, channel management, logistics distribution, after sale service, and manufacturer relationship.

Be the first to comment

Leave a Reply

Your email address will not be published.


*